Power Cable

You must provide a power cable. Be sure to use the specifications below.

Symbol	Item	Specifications
a	Plug	Comply with local safety regulation Class I (2P + PE), AC250 V, 6 A or 10 A Ex.: CEE Pub.7 Certified, CCC Certified, KC Certified, BS1363 Certified, PSB Certified, BIS Certified, SABS Certified Class I (2P + PE), AC125 V, 7 A, 12 A, or 15 A etc. Ex.: UL Certified, PSE Certified, BSMI Certified
b	Flexible cable	Comply with IEC/EN standards or local safety regulation Example: IEC 60227-1: General requirements IEC 60227-5: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) EN 50525-1: General requirements EN 50525-2-11: Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
c	Appliance coupler	Comply with IEC/EN standards or local safety regulation IEC / EN 60320-1: Appliance couplers for household and similar general purposes - Part 1: General requirements Standard Sheet C13: AC250 V/10 A

Symbol

Item

Specifications

Plug

Comply with local safety regulation

Class I (2P + PE), AC250 V, 6 A or 10 A
Ex.: CEE Pub.7 Certified, CCC Certified, KC Certified, BS1363 Certified, PSB Certified, BIS Certified, SABS Certified
Class I (2P + PE), AC125 V, 7 A, 12 A, or 15 A etc.
Ex.: UL Certified, PSE Certified, BSMI Certified

Flexible cable

Comply with IEC/EN standards or local safety regulation

Example:

IEC 60227-1: General requirements
IEC 60227-5: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
EN 50525-1: General requirements
EN 50525-2-11: Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation

Appliance coupler

Comply with IEC/EN standards or local safety regulation

IEC / EN 60320-1: Appliance couplers for household and similar general purposes - Part 1: General requirements
Standard Sheet C13: AC250 V/10 A

For Japan

Item	Specifications
Plug	PSE Certified Class I (2P+PE), AC125 V, 7 A or higher
Code	PSE Certified 0.75 mm² or more
Connector	PSE Certified IEC 60320-1 Standard Sheet C13: AC125 V/10 A or higher

Item

Specifications

Plug

PSE Certified

Class I (2P+PE), AC125 V, 7 A or higher

Code

PSE Certified

0.75 mm² or more

Connector

PSE Certified

IEC 60320-1 Standard Sheet C13: AC125 V/10 A or higher

Precautions for use

CAUTION

Operating the Manipulator without a brake release unit or external short connector connected may cause the brake to fail to release, possibly damaging the brake.

After using the brake release unit, be sure to connect the external short circuit connector to the Manipulator or make sure to leave the connector for the brake release unit connected.
Keep the external short connector. Otherwise you cannot release the brakes.
If you turn on the brake release unit while the brake release switch is being pressed, an unintended arm may move downward. Before turning on the brake release unit, make sure that the brake release switch is not pressed.
If you turn on the brake release unit without the connector, it may lead to the short for the male pin used in the connector. Before turning on the brake release unit, make sure that the connector is connected.