The Manuals of This Product

The following are typical manual types for this product and an outline of the descriptions.

“Safety Manual”

This manual contains safety information for all people who handle this product. The manual also describes the process from unpacking to operation and the manual you should look at next.

Read this manual first.

• Safety precautions regarding robot system and residual risk
• Declaration of conformity
• Training
• Flow from unpacking to operation

RC800 series Manual

This manual explains the installation of the entire robot system and the specifications and functions of the controller. The manual is primarily intended for people who design robot systems.

• The installation procedure of the robot system (specific details from unpacking to operation)
• Daily inspection of the controller
• Controller specifications and basic functions

LS-C series Manual (This book)

This manual describes the specifications and functions of the Manipulator. The manual is primarily intended for people who design robot systems.

• Technical information, functions, specifications, etc. required for the Manipulator installation and design
• Daily inspection of the Manipulator

Status Code/Error Code List

This manual contains a list of code numbers displayed on the controller and messages displayed in the software message area. The manual is primarily intended for people who design robot systems or do programming.

RC800 series Service Manual

LS-C series Service Manual

This manual describes the details of maintenance etc. It is intended for people who perform maintenance.

• Daily inspection
• Replacement and repair of maintenance parts
• The method of firmware update and controller setting backup etc.

Epson RC+ 8.0 User’s Guide

This manual describes general information about program development software.

Epson RC+ 8.0 SPEL+ Language Reference

This manual describes the robot programming language “SPEL+”.

Other Manual

Manuals for each option are available.