Control System Configuration
This option is used with the following combinations of Controllers and software.
TYPE A:
| Controller | Software |
|---|---|
| RC700 | EPSON RC+ 7.0 Epson RC+ 8.0 |
| RC90-B | EPSON RC+ 7.0 Epson RC+ 8.0 |
| RC800-A | Epson RC+ 8.0 |
TYPE B: Robot Controller RC90 with the following label attached.
| Label | Controller | Software |
|---|---|---|
 | RC90 | EPSON RC+ 7.0 Epson RC+ 8.0 |
EPSON RC+ 7.0
| RC90 controller firmware | ||
|---|---|---|
| Ver.7.0.2.0 or later | ||
| EPSON RC+ 7.0 | Before Ver.7.0.1 | !!! |
| Ver.7.0.2 or later | OK | |
!!!: Compatible
Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.0.2 or later.
OK: Compatible
All functions of the EPSON RC+ 7.0 and the Controller are available.
Epson RC+ 8.0
| RC90-B controller firmware | ||
|---|---|---|
| Before Ver.7.5.3.x | Ver.7.5.4.x or later | |
| Epson RC+ 8.0 | N/A | OK |
NG: Not Available
An error will be shown
OK: Compatible
All functions of the Epson RC+ and the Controller are available.
KEY POINTS
- This option is not available for Robot Controller RC90 (EPSON RC+ 5.0) without the label.
- Manual PDF for TYPE B is available from EPSON RC+ 7.0 Ver. 7.0.2