Feeder Stops Working/Does Not Vibrate

• To protect the feeder unit, the feeder will stop operating after a certain period of time even if [Continuous] is selected. This is not a malfunction.
• If the vibration is set as below, the feeder may not vibrate or may only vibrate slightly. Check the settings.
  • The vibration amplitude is set to an extremely small value around 0[%].
  • The vibration time is set to an extremely small value around 100 [ms].
  • The drive waveform is set to [None].
• Try switching the part number or changing to a different movement action. Also, try adjusting the vibration parameters. If the feeder still does not work properly, the unit may have malfunctioned.