Warning Labels

The Manipulator has the following warning labels.
Specific hazards exist in the vicinity of areas with the warning labels. Be thoroughly careful in handling.
To ensure that the Manipulator is operated and maintained safely, be sure to follow the safety information and warnings indicated on the warning labels. Also, do not tear, damage, or remove these warning labels.

Warning Labels

A

Touching any internal electrified parts while the power is turned on may cause electric shock.
Also, regarding the cleanroom & ESD specifications and the ESD specifications, if the cables inside the Manipulator wear down over a long period of operation and cause an internal short circuit, the conduit tube may be electrified. Touching the conduit tube while the power is turned on may cause electric shock.

B

1	2

The surface of the Manipulator is hot during and after operation, and there is a risk of burns.

Information Labels

1
This indicates the product name, model name, serial number, information of supported laws and regulations, product specifications (Weight, MAX.REACH, MAX.PAYLOAD, AIR PRESSURE, Motor Power), Main document No., manufacturer, importer, date of manufacture, country of manufacture, and the like.
For details, see the label affixed to the product.

2

Indicates the position of a brake release button.

Labelled Locations

Common (Arm #2)

Table top mounting specifications

Table top mounting specifications (cable routing from bottom side)

Multiple mounting specifications