Arm Movement Method in the Emergency Stop State

In the emergency stop state, move the Manipulator joints directly by hand as shown below.

• Joint #1:
  Push Arm #1 by hand.

• Joint #2:
  Push Arm #2 by hand.

• Joint #3:
  The joint cannot be moved up or down by hand because the electromagnetic brake is activated.
  Move the joint while pressing down the brake release switch.

• Joint #4:
  The joint cannot be rotated by hand because the electromagnetic brake is activated.
  Move the joint while pressing down the brake release switch.

Symbol	Description
a	Joint #3 and Joint #4 brake release switch
b	Arm #2
c	Joint #3 (up/down movement)
d	Joint #4 (rotation)
e	Shaft
f	Arm #1
g	Base
h	Joint #1 (rotation)
i	Joint #2 (rotation)

KEY POINTS

---

The brake release switch is used with both Joint #3 and Joint #4. Press the brake release switch while in the emergency stop state to simultaneously release the brakes on Joint #3 and Joint #4.

When pressing the brake release switch, watch for the shaft descending or rotating under the weight of the hand.