Table of Mechanical Specifications
Table of Mechanical Specifications
| Item | IF-A1520 | IF-A2330 | IF-A3540 | Notes |
|---|---|---|---|---|
| Machine name | Flexible feeder | |||
| Product size | 330 × 172 × 129 mm | 480 × 292 × 249 mm | 635 × 410 × 258 mm | See below. Outer Dimensions |
| Product weight | 9 kg | 27 kg | 39 kg | |
| Recommended part size | Length of long side 5 to 40 mm | Length of long side 15 to 60 mm | Length of long side 30 to 150 mm | *1 |
| Range of vibration frequency variation | 20 Hz to 80 Hz (1 Hz steps) | 15 Hz to 35 Hz (1 Hz steps) | 15 Hz to 35 Hz (1 Hz steps) | |
| Picking area | 195 × 150 mm | 300 × 230 mm | 440 × 346 mm | See below. Picking Area |
| Fixing screw size | M6 | M8 | M8 | See below. Mounting Hole Positions |
| Maximum Permissible External Force | Fx: 10 N Fy: 10 N Fz: 20 N | Fx: 10 N Fy: 10 N Fz: 30 N | Fx: 10 N Fy: 10 N Fz: 30 N | See below. Maximum Permissible External Force |
| Maximum load weight (parts) | 0.4 kg | 1.5 kg | 2 kg | |
| Maximum platform weight | 1.35 kg | 4 kg | 5 kg | *2 |
| Maximum Plate Displacement | X direction: ±1.5 mm Y direction: ±1.5 mm Z direction: ±1.5 mm | X direction: ±3.5 mm Y direction: ±4.5 mm Z direction: ±4.5 mm | X direction : ±3.5 mm Y direction : ±5.5 mm Z direction: ±6.5 mm | See below. Maximum Plate Displacement |
| Repeatability in plate Z direction | ≤0.02 mm | ≤0.4 mm | ≤0.4 mm | |
| Noise level | <76 dB(A) | <80 dB(A) | <70 dB(A) | *3 |
*1. Before use, operate the flexible feeder to feed actual parts, and make the checks below. Parts that cannot achieve these are not suitable for flexible feeders.
- The parts disperse.
- The parts move.
- The overlapping of parts has been eliminated.
*2. This is the weight limit for customers customizing the platform. Note that this limit is the total weight of the platform and payload.
CAUTION
The customer is responsible for customizing the platform.
If you wish to modify the platform, remove it from the main unit by following the instructions below.
*3. The conditions for noise measurements are shown below.
- No parts loaded on the platform
- Equivalent noise level (LAeq) measured at a distance of 1000 mm from the product
CAUTION
The noise level may be high due to parts vibrating on the platform. In this case, the customer or system integrator is responsible for implementing any measures necessary to meet the operator’s safety requirements.
CAUTION
Parts may fly off the platform during vibration. When approaching the flexible feeder during vibration, wear protective equipment such as safety glasses.