Installation Environment
The hopper can be installed under the following conditions:
Environmental Conditions
| Item | Conditions |
|---|---|
| Storage temperature | +5℃ to +40℃ |
| Storage humidity | 30％ to 80％, no condensation |
| Operating temperature | +5℃ to +40℃ |
| Operating humidity | 30％ to 80％, no condensation |
| Protection class (IP) | IP20 |
| Environment condition | No cleanroom model |
CAUTION
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce the structural strength of the product.
Do not use the product in a place where it may come in contact with water or oil droplets.
With no parts on the container, a typical volume level is 79.6 dB(A) when measured at a distance of 1000 mm. The volume level may be higher depending on the parts placed inside the container. In this case, it is the responsibility of the customer or implementer (integrator) to take the necessary measures to protect the operator's hearing.
The hopper's active components do not emit heat sufficient to require special attention during operation. However, let the system cool for ten minutes prior to taking the container apart for maintenance or repair.
KEY POINTS
The hopper's overall performance may be affected when there are changes in temperature or humidity.
Mount the hopper on a strong, smooth surface. If these conditions are not fulfilled, you may be unable to install the hopper, or it may not perform optimally. See the following for details: