Controller Labels

Warning labels and labels are attached to the Controller and Manipulator.

Specific hazards exist in the vicinity of these labeled locations. Be thoroughly careful in handling.

To safely operate and maintain the robot system, be sure to observe the cautions and warnings described in the warning labels. Also, do not tear, damage, or remove these labels.

Warning Labels

A1

Touching any internal electrified parts while the power is turned on may cause electric shock.
Do not open the cover for 300 seconds after turning off the power. Residual voltage may cause electric shock.
Turn off the POWER switch and perform lockout / tag-out before starting maintenance or repair.

C1

Do not connect the following devices to the TP port. The different signal arrangement could cause a breakdown in the device.

• Dummy plug (optional device)
• Operation Pendant OP500
• Operator Pendant OP500RC
• Jog Pad JP500
• Teaching Pendant TP-3**
• Operator Panel OP1
• Teach Pendant TP1

Labels

1

This label indicates the battery type. It is applied to the device interior.

2
This indicates the product name, model name, serial number, information of supported laws and regulations, product specifications (Rated, Full load Current, SCCR, Weight, Largest Motor Rating), Main document No., manufacturer, importer, date of manufacture, country of manufacture, and the like.

For details, see the label affixed to the product.

Labelled Locations