Manipulator Labels

Warning labels and labels are attached to the Controller and Manipulator.
Specific hazards exist in the vicinity of these labeled locations. Be thoroughly careful in handling.
To safely operate and maintain the robot system, be sure to observe the cautions and warnings described in the warning labels. Also, do not tear, damage, or remove these labels.

Warning Labels

A

Touching any internal electrified parts while the power is turned on may cause electric shock.
Also, regarding the GX4 ESD specifications and Cleanroom & ESD specifications, ifthe cables inside the Manipulator wear down over a long period of operation and causean internal short circuit, the conduit tube may be electrified. Touching the conduit tubewhile the power is turned on may cause electric shock.

B1, B2

B1	B2

The surface of the Manipulator is hot during and after operation, and there is a risk of burns.

C

When releasing the brakes, be careful of the arm falling due to its own weight. Thiswarning label is attached on the Manipulator and optional brake release unit as well.

Labels

1
This indicates the product name, model name, serial number, information of supported laws and regulations, product specifications (Weight, MAX. REACH, MAX. PAYLOAD, AIR PRESSURE, Motor Power), Main document No., manufacturer, importer, date of manufacture, country of manufacture, and the like.

For details, see the label affixed to the product.

2

Indicates the position of a brake release button.