Precautions

  • The USB port is intended for development work. Connect the Teach Pendant and a USB device directly with a USB cable which is 5 m or shorter in length, without using a USB hub or extension cable.
  • Do not connect any devices other than a USB flash drive, mouse, or keyboard.
  • To operate the product in the USB 2.0 High-Speed mode, use a USB cable and USB device capable of this mode.
  • Do not bend or pull the cables forcibly. Do not apply excessive force to the connector.
  • Insert a USB flash drive directly into the Teach Pendant USB port. Operation is not guaranteed when there are cables or hubs between the Teach Pendant and a USB flash drive.
  • Insert and remove a USB flash drive slowly and surely.
  • Do not edit the saved files by the editor. Operation of the robot system after data restoration is not guaranteed.
  • Do not use two USB flash drives at once.

Available USB Flash Drive

Use a USB flash drive that meets the following conditions.

  • USB2.0 supported
  • Without security function
    USB flash drive with password input function cannot be used.

← Beep Sound →

© 2024 Seiko Epson Corp.