Power Specification
There are following two power supplying methods for the camera.
- PoE: Power over Ethernet
- Via the external trigger connector
CAUTION
- If the power is supplied via both PoE and the external trigger connector, the camera will be damaged. Do not supply the power simultaneously via both PoE and the external trigger connector.
- When the camera is connected with CV2, do not supply the battery via the external trigger because the power is supplied via PoE.
Power supply via PoE
To supply power to the camera via PoE, PoE injector (PoE power feeding equipment) to be used should comply wih IEEE802.3af.
For details on power consumption of cameras, refer to the following:
A camera which is connected with CV2, the power is supplied via PoE.
Power supply using External Trigger Connector
To supply power to the camera using the external trigger connector, supply 12VDC (+11.3V to +13.2V) for power voltage.
For details on power consumption of cameras, refer to the following:
When installing the cables, avoid close proximity to strong magnetic fields.
CAUTION
Voltage outside of the specified range may cause damage. If the voltage of the power to the camera exceeds +13.2VDC, the camera will be damaged. If the voltage is less than +11.3V, the camera operation becomes unstable.
Use our optional connector or an equivalent connector for jointing the external trigger connector. Use of other connectors may result in damage to the camera.