Testing the Vision System

Initial Setting

1. Wiring, IP address setting
   Connect the PC, the Controller, and the camera via Ethernet and configure all IP addresses.
   *IP address assignment example

   Device	IP address
   PC	192.168.0.10
   Controller	192.168.0.1
   Camera	192.168.0.3

2. Select the lens and the extension tube.
   Select the lens and the tube based on the size of the viewing field and distance between the part and the camera.

3. Confirm the image
   Click the [Vision] button to open the dialog box. Then, create a sequence to display the camera image.

Vision sequence
Click the [New Sequence] button and create a Vision sequence.