Controller IP Address Change Procedure

This section describes the procedure for changing the IP address of the Controller.

1. Connect the development PC and the Controller by a USB cable.
   Refer to the following section.
   Connecting the Development PC and the Controller

2. In the Epson RC+ menu, select [Setup] - [System Configuration] to display the [System Configuration] dialog box.
   

3. Select [Controller] - [Configuration].

4. Set appropriate values for the IP address and subnet mask, and click the [Apply] button.

5. Click the [Close] button. The Controller is automatically restarted.
   When the Controller restart dialog box no longer appears, setting of the IP address is complete.