Signal Arrangement
CAUTION
- When using R-I/O, pay attention to the following points. Using I/O with remote settings without satisfying the requirements may lead to system failure or safety issues.
Use shielded cables, and route them as far away as possible from noise sources in the surrounding area. Refer to the following section.
Always check the wiring before supplying power.
| Pin No. | Signal Name |
|---|---|
| 7 | Input No. 24-1 |
| 8 | Input No. 24-2 |
| 9 | Input No. 25-1 |
| 10 | Input No. 25-2 |
| 11 | Input No. 26-1 |
| 12 | Input No. 26-2 |
| 13 | Input No. 27-1 |
| 14 | Input No. 27-2 |
| 1 to 6, 15 | Not used |
Do not connect anything to pins 1-6 or 15.
| Connector Name | Standard |
|---|---|
R-I/O Connector (Controller side) | D-sub 15-pin male Mating screw lock part #4 - 40 |