Checking from Epson RC+ (Conveyor Tracking)

1. In the EPSON RC+ menu, select [Setup] - [System Configuration] to display the [System Configuration] dialog box.

2. Select [Conveyor Encoder]. For details on the setting conveyor tracking option, refer to the following manual.
   "Epson RC+ User's Guide - Conveyor Tracking"

CAUTION

---

DC24V to operate Conveyor Tracking Option Kit B is supplied from the conveyor tracking option I/F port (PULSE IN).
When using it, pay attention to the following points.

• Do not connect anything other than the conveyor tracking cable to the conveyor tracking option I/F port. This could damage the connected devices and the Controller.
• Even when you create the conveyor tracking cable, do not use DC24V.
  If you use the products as described above, we do not guarantee the damage of the connected devices or the Controller.