Controller

RC700, RC800 series

Epson RC+ 8.0-compatible firmware version: 7.5.4.x or later

The RC700 and RC800 series Controller is a powerful robotic work cell controller that controls our SCARA robots and 6-axis robots.

Controller features

Sophisticated yet achieving reliability and stability
Built in Motion System
The motion drive system can control up to 6 axes simultaneously and 1 robot, and can add up to three drive units (RC700, RC700-A only)
Includes standard I/O
Wide variety of options

For detailed information on the Controller, refer to the following manual:

"Robot Controller Manual"

RC90-B

Epson RC+ 8.0-compatible firmware version: 7.5.4.x or later

The RC90-B Controller is a robot controller that can drive LS-B series manipulators.

Features:

Built in Motion System
The motion drive system can control one robot.
Includes standard I/O
Optional digital I/O expansion boards
Optional Fieldbus slave support for DeviceNet, PROFIBUS-DP, CC-Link Ethernet/IP, PROFINET, and EtherCAT.
RS-232C ports (standard + optional)

For detailed information on the Controller, refer to the following manual:

"Robot Controller Manual"

T series Manipulator

Epson RC+ 8.0 compatible firmware version: 7.5.54.x or later

The T series Manipulators are Controller integrated SCARA robot.

For more details on Controller part, refer to the following manuals:

VT series Manipulator

Epson RC+ 8.0 compatible firmware version: 7.5.54.x or later

The VT series Manipulators are Controller integrated 6-axis robot.

For more details on Controller part, refer to the following manual:

"VT Series Manipulator Manual"