Robot

Use of a robot is necessary for this system. Be sure to prepare one to use.

Manipulator

A SCARA or 6-axis Manipulator that can be connected to an RC700 series, RC90 series or RC800 series Controller or T/VT series can be used. X5 series and PG are not supported.
Up to two robots on the same robot controller can share the same feeder.

End Effector

An end effector is used to grasp parts. There are various types such as those using suction by vacuum/pressure and those using a chuck mechanism. Select one appropriate to your parts and needs.
Epson does not manufacture or distribute any end effectors. Be sure to prepare proper hands for use.