Enabling an option license (offline authentication for one license at a time)
If your PC has Epson RC+ 8.0 installed, is connected to a Controller, but cannot connect to the Internet, use this authentication method. This method authenticates one license at a time.
Use a PC that can connect to the Internet. In addition, there must be a means of transferring files between two PCs.
Purchase an option-enabling license from the supplier of your region.
Connect to the Controller for which you want to enable the option.
From the [License Configuration] window, select [Controller]-[Options].
Click the [Enable] button.
Enter the license key in the text box. If you acquired the license certificate as a file, click the [Load] button to specify the file.
Select [Offline Authentication] and click [Next].
Access the displayed URL, using a browser on a PC with Internet access.
Click [Start] on the Web page that appears.
Enter the license key and hardware key shown in the window in step 7, and click [Issue].
Click [Output in CSV] to save the authentication key file.
KEY POINTS
If you click [Continue Authentication] without saving the authentication key file, you will need to enter the key again.
Using a USB flash drive or similar device, transfer the authentication key file to the PC connected to the Controller.
From the window displayed by the PC connected to the Controller, click [Next].
Click the [Load] button and specify the transferred authentication key file. Check the displayed option and click [Next].
Check the results window and click [Finish].
Close the [License Configuration] window.
The controller will be automatically restarted.