Unpacking and Transportation
Transportation and installation of the Manipulators shall be performed by personnel who has taken robot system training held by us and suppliers and should conform to all national and local codes.
WARNING
Only authorized personnel should perform sling work and operate a crane and a forklift. When these operations are performed by unauthorized personnel, it is extremely hazardous and may result in serious bodily injury and/or severe equipment damage to the robot system.
CAUTION
Using a cart or similar equipment, transport the Manipulator in the same manner as it was delivered. When transporting the Manipulator, do not attach the MC cable.
After removing the bolts securing the Manipulator to the delivery equipment, the Manipulator can fall. Be careful not to get hands or fingers caught.
To carry the Manipulator, have two or more people to work on it and secure the Manipulator to the delivery equipment. Also, do not hold the shaded area in the figure. Doing so is extremely dangerous and can result in getting your hands and fingers caught.
(Figure: LS8-C)
- LS4-C401*: approx. 14 kg: 30.9bs. (pound)
- LS8-C502*: approx. 19 kg: 41.9 lbs. (pound)
- LS8-C602*: approx. 20 kg: 44.1 lbs. (pound)
- LS8-C702*: approx. 21 kg: 46.3 lbs. (pound)
Stabilize the Manipulator with your hands when hoisting it. If you lose balance, the Manipulator may fall which could result in serious bodily injury and/or severe equipment damage.
When transporting the Manipulator for a long distance, secure it to the delivery equipment directly so that the Manipulator never falls over. If necessary, pack the Manipulator in the same style as it was delivered.