Mounting the Container on the Base
WARNING
Do not turn on the the power source before mounting the container. When you mount the container, make sure to disconnect all cables.
CAUTION
When mounting the container, take sufficient safety precautions, such as wearing protective equipment.
There is a danger of fingers getting caught between heavy objects. Do not put your fingers between the container and the base.
In the case of Hopper L, first tighten the screws on the front side. If you do not follow this instruction, the Hopper L may malfunction, causing damage to the system.
Mounting a Hopper S container
Use the following to mount the container.
Screws: M5
Tool: Hex key wrench 4
Fixing torque: 5.5 N·m
Remove the screws from the container.
Place the container on top of the base and line up the fixing holes for fastening it into place.
Loosely screw the four screws and washers into the fixing holes.
When all four screws are in their given holes, tighten them using the specified torque.
Mounting a hopper M container
Use the following to mount the container.
Screws: M6
Tool: Hex key wrench 5
Fixing torque: 9 N·m
Place the container on top of the base and line up the fixing holes for fastening it into place.
Loosely screw the four screws and washers into the fixing holes.
When all four screws are in their given holes, tighten them using the specified torque.
Mounting a hopper L container
Use the following to mount the container.
Screws: M6
Tool: Hex key wrench 5
Fixing torque: 9 N·m
Place the container on top of the base and line up the fixing holes for fastening it into place.
Loosely screw the four screws and washers into the fixing holes.
When all four screws are in their given holes, tighten them using the specified torque.
CAUTION
Customers are responsible for any modification to the container.
Do not remove material from the container by machining or cutting it. Doing so may affect the system's rigidity and proper functioning.
If you modify the container, make sure to remove it from the base before any drilling. See the following for information on how to remove the container.