Constraints when adjusting vibrational amplitude
A smart sensor is incorporated into the hopper, making it possible to adjust the amplitude of vibrations.
With it, the system can detect the current part load and automatically adjust the amplitude of vibrations, guaranteeing that parts are supplied at a constant rate.
KEY POINTS
If you apply amplitudes greater than the recommended limits shown in the table below, the control unit will become unable to reach the intended amplitudes. As a result, the hopper's vibrational amplitude will increase as the container empties out.
Hopper S
| Total Part Load | Recommended Amplitude |
|---|---|
| 0.5 kg or less | Maximum 100% |
| 0.5 kg to 1 kg | Maximum 75% |
| 1 kg to 1.5 kg | Maximum 50% |
| 1.5 kg to 2 kg | Maximum 25% |
Hopper M
| Total Part Load | Recommended Amplitude |
|---|---|
| 4 kg or less | Maximum 100% |
| 4 kg to 6 kg | Maximum 75% |
| 6 kg to 9 kg | Maximum 50% |
| 9 kg to 12 kg | Maximum 25% |
Hopper L
| Total Part Load | Recommended Amplitude |
|---|---|
| 5 kg or less | Maximum 100% |
| 5 kg to 10 kg | Maximum 75% |
| 10 kg to 15 kg | Maximum 50% |
| 15 kg to 20 kg | Maximum 25% |