Performing Calibration
Hold down the [Calib.] push button for five seconds to begin the calibration process.
During calibration, the control unit will perform sweeps at multiple frequencies and various amplitudes in order to find the best operational conditions. During calibration, the status LED display will blink blue. See the following for details:
Calibration takes 30 to 60 seconds.
The Calibration Push Button
* Push the [Calib.] push button with the included wire or similar.
KEY POINTS
While calibration is being performed, observe the following:
Do not touch the hopper.
Do not touch the base table to which the hopper is affixed.