Notes

Pay attention to the following points when connecting the development PC and the Controller.

• Connect the development PC and the Controller using a USB cable with length of 5 meters or less, and do not use a USB hub or extension cable.
• Do not connect any device other than the development PC to the development PC connection port.
• To operate in USB 2.0 HighSpeed mode, use a PC or USB cable that supports USB 2.0 HighSpeed mode.
• Do not pull on or bend the cable excessively.
• Do not apply excessive force to the connector.
• While the development PC and the Controller are connected, do not connect or disconnect other USB devices from the development PC. This could cause the Controller to disconnect.