What is Development PC Connection USB Port?

The development PC connection port supports the following USB standards:

• USB 2.0 HighSpeed/FullSpeed (speed auto selection or Full Speed mode)
• USB1.1 FullSpeed

Interface standard: USB specification version 2.0 compliant (USB version 1.1 upward compatibility)

Connect the Controller and development PC by a USB cable to enable development of the robot system and setting of the Controller configuration with the Epson RC+ software installed in the development PC.

The development PC connection port supports hot plugging, and so cables can be inserted and removed while the development PC and the Controller are turned on. However, the robot stops when the USB cable is removed while the Controller and the development PC are connected.