Before Using the Controller Backup Function

Notes

CAUTION

Regardless of the Controller status, the Controller Backup function can be executed at any time after the Controller is started.

However, no operations from the console, including aborting or pausing, are accepted while this function is running.

This function also affects the cycle time of the robot and communication with Epson RC+. In particular, if it is not necessary, do not execute the Controller Backup function while the robot is operating.

Although the memory port is physically a general-purpose USB port, never connect any USB devices other than USB memory devices.
The USB memory device should be inserted directly into the memory port of the Controller. Operation is not guaranteed when there is a cable or hub between the Controller and the USB memory device.
Insert and remove the USB memory device slowly and securely.
Do not modify the saved files with editors or other software. Operation of the robot system is not guaranteed when data is restored to the Controller.

For the supported USB memory devices, refer to the following section.
Specifications Table