24VDC wiring
Refer to the following and wire the 24VDC power source to the connector.
| Indication on CV2 | Description of signal |
|---|---|
| - | 24V power source ground |
| + | 24V power source input |
| + | 24V power source input |
| - | 24V power source ground |
Appropriate Wire Diameter :AWG14 to AWG24
CAUTION
- Be sure to turn OFF the product when wiring the power source. Make sure that wiring and voltage are correct before turning ON the product.
- Use as thick and short a wire as possible for wiring 24VDC power source.
- Keep the 24VDC power source cable away from peripheral noise sources as possible.
- Do not insert and remove the connector while applying current to the 24VDC connector. ON/OFF switch must be installed at AC side of the 24VDC power source. Inserting and removing the connector while applying current to the 24V connector or turning ON/OFF at 24VDC side may cause fusing inside CV2.