Notes

Pay attention to the following points when connecting the development PC and the Manipulator.

• Connect the development PC and the Manipulator with a USB cable that meets the standard. Do not use the USB hub or extension cable.
• Connect one Controller per development PC. Connecting multiple Controllers to one development PC may cause unintended Controller operation.
• Do not connect any device other than the development PC to the development PC connection port.
• Do not pull on or bend the cable excessively.
• Do not apply excessive force to the connector.
• While the development PC and the Manipulator are connected, do not connect or disconnect other USB devices from the development PC. This could cause a disconnection with the Manipulator.