Standard environment specification
- Secure the base to the base table with four bolts.
KEY POINTS
Use bolts with specifications conforming to ISO898-1 Property Class 10.9 or 12.9.
Tightening torque: 32.0 N·m (326 kgf·cm)
| Symbol | Description |
|---|---|
| a | M8×25 |
| b | Spring Washer |
| c | Plain Washer |
| d | Screw Hole (20 mm or more depth) |
- Using nippers, cut off the wire tie binding the shaft and arm retaining bracket on the base.
- Remove the bolts (with red tag) securing the wire ties removed in step 2
KEY POINTS
Make sure to remove the wire tie for protection of mechanical stop.
| Symbol | Description |
|---|---|
| a | Bolt: M4 (with red tag) |
| b | Wire tie |