Precautions for Relocation and Storage
For details on relocation, refer to the following.
Transportation and installation of the Manipulator and robotic equipment shall be performed by personnel who has taken robot system training held by us and suppliers and should conform to all national and local codes. Also, the laws and regulations of the installation country must be followed.
As for transportation and storage, make sure to check the following:
When the Manipulator is reassembled and used for a robot system again after an extended period of storage, perform a test run to verify that it works properly before starting the main operation.
Transport and store the Manipulator in the range of Temperature: −20 to +60 ℃C, Humidity: 10 to 90% (no condensation).
If condensation has formed on the Manipulator during transportation or storage, do not turn on the power until the condensation is removed.
Do not subject the Manipulator to excessive impacts or vibrations during the transportation process.
CAUTION
Store the Manipulator in an upright manner. When stored on its side, grease may leak.