Loose Connector and Signal Wire

Check for the connections of the following parts on the connector and cable.

1. Crimping Terminal (a)

   

2. Use a small flat blade screwdriver (a) that has the correct width and thickness.

   

3. Connection of the connector and the unit (T-branch tap)

   

   Symbol	Description
   a	Connector on the node (mask) side
   b	Screw
   c	Cable side
   d	Connector on the T-branch side
   e	Screw
   f	Connector on the cable side

   

   Symbol	Description
   a	Thin Cable
   b	Cable with M12 micro-size shielded connector (at one end or both ends)
   c	Male
   d	Female
   e	Mounting hole