Verifying applicomIO Console Application Condition

The status bar at the bottom of the window shows the applicomIO Console application status. The status bar varies as shown below:

Character:
The address number of the scanner board is indicated with characters.
When the character "F" appears, the flash memory on the board initialized the scanner board.

Background color:
The background color indicates the scanner board status. For details, refer to the table below.

Background color	Character	State
Gray	Black	Access to scanner board was failed. After that, the status bar will not be renewed automatically. To renew the status bar, right-click the status bar and select Refresh.
Magenta	Black	The scanner board was initialized with an earlier version applicomIO Console application. It is recommended that the scanner board be written into the flash memory (reinitializing the scanner board) again with the current version applicomIO Console application.
Red	Black	The scanner board was not initialized. Initialize the scanner board to use it.
Yellow	Black	The scanner board was partially initialized. This status happens only during the following operations. Network detection on-line actions
Deep green	White	Although the scanner board was initialized, it is different with the currently opened configuration. (Different version, etc.) It is recommended that the scanner board be written into the flash memory (reinitializing the scanner board) again with the current version applicomIO Console application. This status happens only during the following operations. Network detection On-line actions diagnostic
Green	Black	The scanner board was initialized properly and it is no different with the currently opened configuration. This status happens only during the following operations. Network detection On-line actions diagnostic