Design and Installation Safety
This product is intended for transporting and assembling parts in a safely isolated area.
The robot system should be designed and installed by people who have received installation training provided by Epson and the suppliers.
To ensure safety, a safeguard must be installed for the robot system. For details on the safeguard, refer to the following:
Safeguard (Safeguard Interlock)
The following items are safety precautions for design personnel:
WARNING
- Personnel who design and/or construct the robot system with this product must read the “Safety Manual” and check the safety requirements. Designing and/or constructing the robot system without understanding the safety requirements is extremely hazardous, and may result in serious bodily injury and/or severe equipment damage. It may cause serious safety related problems.
- The robot system must be used within the environmental conditions described in their respective manuals. This product is designed and manufactured for use in a normal indoor environment. Use of the product in an environment that does not meet the operating environmental conditions will not only shorten the product life, but may also cause serious safety issues.
- The robot system must be used within the installation requirements described in the manuals. Using the robot system outside of the installation requirements may not only shorten the life cycle of the product but also cause serious safety problems.
- When designing or installing a robot system, wear at least the following protective gear. Working without protective gear may cause serious safety problems.
- Work clothes suitable for work
- Helmet
- Safety shoes
Refer to the following for the installation safety information.
Be sure to read this section and follow the safety information before installation to ensure that the installation work is performed safely.