Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist. Be sure to comply with descriptions and warnings on the labels to operate and maintain the Manipulator safely.
Use meticulous care when handling those parts or units to which the following warning labels are attached as well as the nearby areas. Do not tear, damage, or remove the warning labels.
| Location | Warning Label | NOTE |
|---|---|---|
| A |  | HOT Be careful not to burn yourself. |
| B |  | When releasing the brakes, be careful of the arm falling due to its own weight. |
| C |  | Do not connect the following devices to the TP port that has this label attached to it. The different signal arrangement could cause a breakdown in the device. Dummy plug (optional device) Operation Pendant OP500 Operator Pendant OP500RC Jog Pad JP500 Teaching Pendant TP-3 ** Operator Panel OP1 |
| D |  | Touching any internal electrified parts while the power is turned on may cause an electric shock. Make sure to always turn the power off when performing maintenance and repairing parts. Do not open the cover for 300 seconds after turning off the power. Residual voltage may cause an electric shock. |
| Location | Label | NOTE |
|---|---|---|
| 1 | - | The product name, model name, serial number, information of supported laws and regulations, product specifications, manufacturer, importer, date of manufacture, country of manufacture, etc. are listed. For details, see the label affixed to the product. |
Location of Labels
