FF_WriteHopperParam

Writes the parameters for hopper output movements A to Z to the feeder flash memory.

Format

FF_WriteHopperParam "Hopper output movement" Setting value 1, Setting value 2, …, Setting value 5

Parameter

• Hopper output movement
  • A to Z: Specify the symbol for the hopper output movement.
• Setting value
  • Setting value 1: Output 1 enabled/disabled (0: disabled, 1: enabled)
  • Setting value 2: Output 1 amplitude (0 to 100[%])
  • Setting value 3: Output 2 enabled/disabled (0: disabled, 1: enabled)
  • Setting value 4: Output 2 amplitude (0 to 100[%])
  • Setting value 5: Duration (0 to 30000 [ms])

Returned value

• 0: Operation successful
• -1: Operation failed

Example of use

Write the parameters for hopper output movement "A".

The returned value "0" indicates that the operation was successful.

> FF_WriteHopperParam "A" 1, 0, 0, 100, 1000
0