FF_WriteSequence

Writes the sequence parameters to the feeder flash memory using the specified sequence ID and operation number.

Format

FF_WriteSequence Operation number, Sequence ID, Setting value 1, Setting value 2, …, Setting value 5

Parameter

• Operation number
  • 1 to 7: Specifies the operation number.
• Sequence ID
  • 1 to 26: Specifies the sequence ID.
• Setting value
  • Setting value 1: Type
    • 0: None
    • 1: Platform Vibration
    • 2: Output Activation
    • 3: Waiting Time
    • 4: Purge Gate
  • Setting value 2: Operation
    • A to Z: Platform Vibration or Output Activation action
    • 0/1: Purge gate status (0: Closed/1: Open)
  • Setting value 3: Continuation mode
    • 0: Fixed
  • Setting value 4: Duration
    • 0 to 30000 [ms]
  • Setting value 5: PartCntMax
    • 0: Not used, so "0" always returned

Returned value

• 0: Operation successful
• -1: Operation failed

Example of use

Write the sequence parameters for sequence ID "1" and operation number "2".

The returned value "0" indicates that the operation was successful.

> FF_WriteSequence 2, 1, 1, C, 0, 1000, 0
0