LED Description
LED state represents the states of the fieldbus Module.
NS: Network Status LED
| LED State | Description |
|---|---|
| OFF | No power or no IP address |
| Green | On-line, one or more connections are established (CIP Class 1 or 3) |
| Green, flashing | On-line, no connections established |
| Red | Duplicate IP address, FATAL error |
| Red, flashing | One or more connections timed-out (CIP Class 1 or 3) |
MS: Module Status LED
| LED State | Description |
|---|---|
| Green | Controlled by a Scanner in Run state |
| Green, flashing | Not configured, or Scanner in Idle state |
| Red | Major fault (EXCEPTION-state, FATAL error etc.) |
| Red, flashing | Recoverable fault(s). Module is configured, but stored parameters differ from currently used parameters. |
| Green | Controlled by a Scanner in Run state |
LINK/Activity LED
| LED State | Description |
|---|---|
| OFF | No link, no activity |
| Green | Link (100 Mbit/s) established |
| Green, flickering | Activity (100 Mbit/s) |
| Yellow | Link (10 Mbit/s) established |
| Yellow, flickering | Activity (10 Mbit/s) |