LAN setting

1. Open the Windows Control Panel. Click [View network status and tasks].
   

2. Click [Change adapter settings].
   

3. Select the adapter to which the Controller is connected by double-clicking and display [Properties].
   

4. Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
   

5. Select [Use the following IP address].

6. Enter the following:
   IP address: 192.168.0.10
   Subnet mask: 255.255.255.0
   

7. Click [OK] to save the changes.

KEY POINTS

---

The Robot Controller, the CV2, and the GigE camera do not support the internet protocol version 6 (TCP/IPv6). When connecting via the Ethernet, make sure to use the internet protocol version 4 (TCP/IPv4).