Using Multiple CV2 Cameras

The CV2 supports up to six cameras (four GigE cameras and two USB cameras). Each camera is referenced from RC+ by a system camera number. A system camera number is assigned to each camera connected to the CV2 Controller by camera configuration in RC+.
When you add the first camera to the CV2 system, the [Channel] is set to 1. To add a second camera to the same CV2 system, click the [Add] button, and add the searched camera.

Click the [OK] button to search the cameras on the network and display them on the list.

A camera can be registered to the system by selecting the camera and clicking the [Add] button.

Click the [Apply] button to complete. To see the camera configuration in the CV2 Controller, select the camera and click the [Configure…] button to show the [Configure Camera] dialog box. This will show the GigE camera and USB camera that are assigned for each channel. The camera ID is printed on the label of the camera.