Compliance with the EMC Regulations
Our robot controllers and optional CC-Link boards are built into mechanical devices.
EMC compliance with your end product (entire mechanical device which builds our products into the device) varies depending on configuration, wiring, placement, and so on. Therefore, please judge the EMC compliance of your final product by yourself.
An example of EMC countermeasures is described below.
Mount a ferrite core to the CC-Link cable to reduce radiation noise.
Use the exclusive cable for CC-Link.
Place the ferrite core as close as possible to the controller.
Change the number of the cable turns to the ferrite core depending on the radiation noise condition.
Use the ferrite core listed in the table below or equivalent.
Manufacturer Part number Kitagawa Industries Co., LTD. GTFC-41-27-16
| Symbol | Description |
|---|---|
| a | Robot Controller RC700 Series |
| b | Robot Controller RC90 Series |
| c | Ferrite Core |
| d | CC-Link Cable (4 turns) |
CAUTION
This example is an idea of the EMC countermeasures in our installation and wiring conditions. The test result may vary in your testing environment.