Unpacking and Transportation
Use a cart or a similar equipment to transport the Manipulator in the same condition as it was delivered. Observe the following when unpacking the Manipulator.
Unpacking, and transportation shall be performed by personnel who has taken robot system training held by Epson and the suppliers and should conform to all national and local codes.
WARNING
- Only authorized personnel should perform sling work and operate a crane and a forklift. When these operations are performed by unauthorized personnel, it is extremely hazardous and may result in serious bodily injury and/or severe equipment damage to the robot system.
- Stabilize the Manipulator with your hands when hoisting it. Unstable hoisting is extremely hazardous and may result in serious bodily injury and/or severe equipment damage such as the fall of the Manipulator.
CAUTION
Use a cart or the like to transport the Manipulator in the same status as it was delivered.
When removing the fixing bolts securing the Manipulator to the transportation pallet and the packing box or the anchor bolts, support the Manipulator to prevent it from falling. Removing the fixing bolts or anchor bolts without supporting the Manipulator may cause it to fall, catching your hands or feet. Also, when installing and transporting the Manipulator, make sure it does not fall until all of the bolts are fixed.
The Manipulator should be transported by two or more people or secured to transporting equipment. Also, do not hold the bottom of the base (the shaded area in the figure). Holding these parts by hand is extremely hazardous and may cause your hands and fingers to get caught.
VT6-B901**
Approximately 43 kg: 94.8 lbs.When transporting the Manipulator, avoid excessive vibration or shock. Excessive vibration or shock may cause equipment damage and/or malfunction of the Manipulator.
When transporting the Manipulator over long distances, secure it directly to transporting equipment so that it will not fall. If necessary, pack the Manipulator using the same packaging as delivery.