Power Cable
WARNING
- All work operations should be performed by people with specialized knowledge and skills in the field.
- The ground wire (green/yellow) of the AC power cable must be connected to the ground terminal of the power distribution system.
If the ground wire is improperly connected to ground, it may result in the electric shock. - Always use a power plug or a disconnecting device for the power connection cable. Never connect the Controller directly to the factory power supply.
- Select a plug or disconnecting device which complies with the safety standards of the respective country.
When connecting the connector of a Power cable to the Manipulator, insert until it clicks into place.
The specification for the power supply connection side is is as shown in the table below.
AC specification
| Item | Specifications |
|---|---|
| AC power wire (2 cables) | Black/White |
| Protective ground wire | Green/Yellow |
| Cable length | 5 m |
| Terminal | M4 round terminal |
The power cables can be secured using the cable clamp which is located in the rear side of the Manipulator.
(Only for Standard model, Cleanroom model)