Basic operation of the Epson Feeder Configurator

The Epson Feeder Configurator has the following seven main functions:

	Function name	Description
1	Vibration	Adjust and check the vibration parameters for each action. The vibration function has two modes: [Adjust Mode] for adjusting vibration parameters and [Confirm Mode] for reviewing the adjustments made. Important actions can be easily configured using the wizard.
2	Sequence	You can create and verify the sequence of movement actions, output actions, and the opening and closing of purge gates. The sequencing function has two modes: [Create Mode] for creating sequences and [Confirm Mode] for reviewing the sequences you have created.
3	Digital I/O	You can check and debug digital I/O interfaces. You can monitor the status of inputs and outputs.
4	Device Settings	You can configure the devices connected to the feeder unit (hopper, purge gate) and the backlight settings.
5	System Settings	You can configure and check the system settings.
6	Maintenance	You can perform maintenance on the feeder unit.
7	Terminal	You can display the terminal screen and send and receive dedicated commands with the IF-A series.