Command 900: Sets the Local coordinate number
Specifies the local number to be used.
Command Syntax
| bit | Name | Description | |
|---|---|---|---|
| Parameter 1 | 15 | localNumber | Specifies the local coordinate number to use. 0 = use no local coordinate 1 – 15 = use the specified local coordinate |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
Response Syntax
Refer to the following.
Description
Specifies the local number to be used.
Specifying the number other than 0 makes the coordinate function in the specified local coordinate.
Example
When setting the local coordinate number 1.
| Command | Response |
| 0384H 0001H | 0384H 0000H 0000H |