Command 950: Sets the condition for using Sense with command 2002 and 2003

Sets the Sense condition.

Command Syntax

	bit	Name	Description
Parameter 1	15	I/O number (bit)	Specifies the bit I/O number to be used to the input condition.
	14
	｜
	1
	0

	bit	Name	Description
Parameter 2	15	reserved	Specify “0”.
	｜
	2
	1	I/O type	0 = I/O 1 = memory I/O
	0	logic	Specifies the logic to satisfy the condition 0 or 1

Response Syntax

Refer to the following.

Response Codes

Description

Specifies the bit I/O number to be used for the input condition and the logic to meet the condition.

Example

When setting the condition under the timing when port number 100 turns ON.

Command	Response
03B6H 0064H 0001H	03B6H 0000H 0000H