Command 209: Acquires the setting value from the speed table
Acquires registered values from the Arm speed table for CP motion.
Command Syntax
| bit | Name | Description | |
|---|---|---|---|
| Parameter 1 | 15 | tableNumber | Specifies the registration position in the table using an integer from 0 to 15. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
Response Syntax
| bit | Name | Description | |
|---|---|---|---|
| Response 1 | 15 | tableNumber | Returns the specified table number in an integer. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 2 | 15 | speed High-order word | Returns the value which increased the speed (integer, unit: mm/sec) × 1000 and converted to a 32-bit integer. High-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 3 | 15 | speed Low-order word | Returns the value which increased the speed (integer, unit: mm/sec) × 1000 and converted to a 32-bit integer. Low-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 4 | 15 | departSpeed High-order word | Returns the value indicating the depart speed for Jump3 (Unit: mm/sec) × 1000 and converted to a 32-bit integer. High-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 5 | 15 | departSpeed Low-order word | Returns the value indicating the depart speed for Jump3 (Unit: mm/sec) × 1000 and converted to a 32-bit integer. Low-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 6 | 15 | approachSpeed High-order word | Returns the value indicating the approach speed for Jump3 (Unit: mm/sec) × 1000 and converted to a 32-bit integer. High-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 7 | 15 | approachSpeed Low-order word | Returns the value indicating the approach speed for Jump3 (Unit: mm/sec) × 1000 and converted to a 32-bit integer. Low-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
Description
Acquires registered values from the specified position of the arm speed table for CP motion.
Speed, depart speed, and approach speed can be acquired by using this command.
If the specified table number is out of range or not registered, an error response will be returned.
The value will be returned as fixed-point data which validates to three decimal places.
Example
When registering speed as “100.001”, depart speed as “50.002”, and approach speed as “60.003” to the table 1.
| Command | Response |
| 00D1H 0001H | 00D1H 00001H 0001H 86A1H 0000H C352H 0000H EA63H |