Command 56: Acquires current acceleration and deceleration setting values
Reads the current acceleration and deceleration settings for linear and CP motion.
Command Syntax
No parameter
Response Syntax
| bit | Name | Description | |
|---|---|---|---|
| Response 1 | 15 | accel High-order word | Returns the acceleration value which ｈis the actual acceleration (Unit: mm/sec2) × 1000 and converted to a 32-bit integer. High-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 2 | 15 | accel Low-order word | Returns the acceleration value which ｈis the actual acceleration (Unit: mm/sec2) × 1000 and converted to a 32-bit integer. Low-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 3 | 15 | decel High-order word | Returns the deceleration value which is the actuｈal deceleration (Unit: mm/sec2) × 1000 and converted to a 32-bit integer. High-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
| bit | Name | Description | |
|---|---|---|---|
| Response 4 | 15 | decel Low-order word | Returns the deceleration value which is the actuｈal deceleration (Unit: mm/sec2) × 1000 and converted to a 32-bit integer. Low-order side 16 bit. |
| 14 | |||
| ｜ | |||
| 1 | |||
| 0 |
Description
Acquires current acceleration and deceleration settings.
The value will be returned as fixed-point data which validates to three decimal places.
Example
When acceleration is set to “100.123” and deceleration is “200.000”.
| Command | Response |
| 0038H | 0038H 0001H 871BH 0003H 0D40H |