Flip & Separate Automatic Calibration
To perform the flip and separate calibration, select the [Automatic Calibration] tab on the screen below. This item is displayed as "Separate" when Flip is disabled.
Refer to the following section for further details.
General
Select the [Automatic Calibration] tab on the screen below.
KEY POINTS
The [Automatic Calibration] tab will not appear if the platform type is set to "Slots", "Holes", or "Pockets".
Refer to the following section for further details.
General
Description of display items
| Items | Description |
|---|---|
| Amplitude | Displays the strength of the amplitude of the vibration after the Automatic Calibration. Unit: % |
| Duration | Displays the duration time of the vibration after the Automatic Calibration. Unit: ms |
Calibration
- Place the number of parts displayed in the instruction.
- Click the [Run] button.
Feeder starts vibrating and the optimal Amplitude and Duration will be determined.
The process can take several minutes to perform depending upon the physical characteristics of the part (weight, size, material, surface friction etc…). - Click the [Apply] button The result saved.