Region Automatic Calibration
Performs the calibration of the pick region shifting. This item is displayed when "Pick region" is selected.
Refer to the following section for further details.
Pick
Select the [Automatic Calibration] tab on the screen below.
KEY POINTS
The [Automatic Calibration] tab will not appear if the platform type is set to "Slots", "Holes", or "Pockets".
Refer to the following section for further details.
Vibration
Description of display items
| Items | Description |
|---|---|
| Forward Duration | Displays the time that is required to shift parts into the pick region. Unit: ms |
| Forward Amplitude | Displays the strength of the amplitude of the vibration. Unit: % |
| Forward Frequency | Displays the frequency of the vibration. Unit: Hz |
| Back Duration | Displays the time required to shift parts that have accumulated against the platform wall back into the pick region. Unit: ms |
| Back Amplitude | Displays the strength of the amplitude of the vibration. Unit: % |
| Back Frequency | Displays the frequency of the vibration. Unit: Hz |
Calibration
- Place one part in the platform as displayed in the instruction
- Click the [Run] button.
Feeder starts vibrating and the optimal shift durations and amplitudes will be determined. - Click the [Apply] button. Result saved.