Purge - Automatic Calibration (for IF-80)
To perform the purge calibration (IF-80 feeder only), select the [Automatic Calibration] tab on the screen below. This item is displayed when Purge enabled.
Refer to the following section for further details.
Prevent Interference with Hand
Select the [Automatic Calibration] tab on the screen below.
KEY POINTS
The [Automatic Calibration] tab will not appear if the platform type is set to "Slots", "Holes", or "Pockets".
Refer to the following section for further details.
Vibration
Description of display items
| Items | Description |
|---|---|
| Amplitude | Set the strength of the amplitude of the vibration. Unit: % |
| Duration | Set the duration of the vibration. Unit: ms |
| Frequency | Set the frequency of the vibration. Unit: Hz |
Calibration
- Empty the purge box (optional).
- Place the number of parts displayed in the instruction.
- Click the [Run] button.
Feeder starts vibrating and the optimal Amplitude and Duration will be determined.
The process can take several minutes to perform depending upon the physical characteristics of the part (weight, size, material, surface friction etc…). - Click the [Apply] button The result saved.